SNR
Unidades de rodamiento CUC208-24
Soporte SNR CUC208-24, Ø38.1×80×49.2 mm. Solicita presupuesto — envío a todo el mundo.
Tipo Unidades de rodamiento
Dimensiones
Ø 38,1 × 80 × 49,2 mm
d38,1Ø interior (mm)
×
D80Ø exterior (mm)
×
B49,2Ancho (mm)
Solicitar presupuesto
Disponible
Especificaciones técnicas
| Brand | SNR |
| a - Distance to grooves in OR | 3,4 mm |
| b - Groove width in OR | 1,9 mm |
| B - Width of Inner Ring | 49,2 mm |
| C - Width of Outer Ring | 21 mm |
| C1 - Distance center of OR to center of lubrication zone | 5 mm |
| d - Shaft diameter | 38,1 mm |
| D - Outer diameter of OR | 80 mm |
| G - Set screw size | 5/16-24UNF |
| m - Distance to set screw | 8 mm |
| N1 - Groove dia in OR | 76,81 mm |
| r - Radius Inner Ring | 1.1 |
| S - Distance front side/bearing centre | 19 mm |
| f0 - Factor | 13.7 |
| SW - Wrench size | 3,969 mm |
| C - Dynamic load rating | 32600000 mN |
| C0 - Static load rating | 19900000 mN |
| Operating temperature min. | 253,15 °K |
| Operating temperature max. | 373,15 °K |
| Mass | 0,68 kg |
| Recommended tightening torque for set screw | 8 N-m |
| BPFO - Over rolling frequency on outer ring (60 rpm) | 3,547 Hz |
| BPFI - Over rolling frequency on inner (60 rpm) | 5,452 Hz |
| BSF - Over rolling frequency on rolling element (60 rpm) | 4,513 Hz |
| BRF - Rotational frequency – rolling element (60 rpm) | 2,256 Hz |
| FTF - Rotational frequency - cage (60 rpm) | 0,394 Hz |
Productos relacionados
SNR CUC208-24