SNR
Unidades de rodamiento US212G2T20
Soporte SNR US212G2T20, Ø60×110×53.7 mm. Solicita presupuesto — envío a todo el mundo.
Tipo Unidades de rodamiento
Dimensiones
Ø 60 × 110 × 53,7 mm
d60Ø interior (mm)
×
D110Ø exterior (mm)
×
B53,7Ancho (mm)
Solicitar presupuesto
Disponible
Especificaciones técnicas
| Brand | SNR |
| B - Width of Inner Ring | 53,7 mm |
| C - Width of Outer Ring | 24 mm |
| C1 - Distance center of OR to center of lubrication zone | 8 mm |
| d - Shaft diameter | 60 mm |
| D - Outer diameter of OR | 110 mm |
| G - Set screw size | M10x1,25 |
| m - Distance to set screw | 9,8 mm |
| r - Radius Inner Ring | 1.1 |
| S - Distance front side/bearing centre | 14,9 mm |
| f0 - Factor | 14.2 |
| SW - Wrench size | 5 mm |
| C - Dynamic load rating | 52500000 mN |
| C0 - Static load rating | 32800000 mN |
| Operating temperature min. | 253,15 °K |
| Operating temperature max. | 473,15 °K |
| Mass | 1,3 kg |
| Recommended tightening torque for set screw | 22 N-m |
| BPFO - Over rolling frequency on outer ring (60 rpm) | 4,066 Hz |
| BPFI - Over rolling frequency on inner (60 rpm) | 5,934 Hz |
| BSF - Over rolling frequency on rolling element (60 rpm) | 5,168 Hz |
| BRF - Rotational frequency – rolling element (60 rpm) | 2,584 Hz |
| FTF - Rotational frequency - cage (60 rpm) | 0,407 Hz |
Productos relacionados
SNR US212G2T20