SNR
Roulements rigides à billes 6002NC3
Roulement SNR 6002NC3, Ø15×32×9 mm. Demandez un devis — expédition dans le monde entier.
Type Roulements rigides à billes
Dimensions
Ø 15 × 32 × 9 mm
d15Ø alésage (mm)
×
D32Ø extérieur (mm)
×
B9Largeur (mm)
Demande de devis
En stock
Spécifications techniques
| Brand | SNR |
| d - Internal diameter | 15 mm |
| D - External diameter | 32 mm |
| B - Bearing/Inner ring width | 9 mm |
| d1 - External diameter inner ring | 20,5 mm |
| D1 - Inner diameter outer ring | 28,8 mm |
| a min - Min position Groove | 1,9 mm |
| a max - Max position groove | 2,06 mm |
| rs - Min fillet radius | 0,3 mm |
| rNs - Min fillet radius | 0,3 mm |
| D3 - Max bottom groove diameter | 30,15 mm |
| b min - Min groove width | 1,35 mm |
| b max - Max groove width | 1,65 mm |
| r0 max - Max bottom groove radius | 0,4 mm |
| Radial clearance class | C3 |
| Mass | 0,03 kg |
| C - Dynamic load | 5900000 mN |
| C0 - Static load | 2850000 mN |
| Cu - Fatigue limit load | 130000 mN |
| f0 - Coefficient | 13.9 |
| N ref - Reference thermal speed | 132000 °/s |
| N lim - Mechanical Limit Speed | 234000 °/s |
| Tmin - Min operating temperature | 233,15 °K |
| Tmax - Max operating temperature | 393,15 °K |
| BPFO - Over rolling frequency on outer ring (60 rpm) | 3,588 Hz |
| BPFI - Over rolling frequency on inner (60 rpm) | 5,412 Hz |
| BSF - Over rolling frequency on rolling element (60 rpm) | 4,731 Hz |
| BRF - Rotational frequency – rolling element (60 rpm) | 2,366 Hz |
| FTF - Rotational frequency - cage (60 rpm) | 0,399 Hz |
| da min - Min shoulder diameter IR | 17 mm |
| Da max - Max shoulder diameter OR | 30 mm |
| ra max - Max shaft & housing fillet radius | 0,3 mm |
| rNa max - Max fillet radius on segment side | 0,3 mm |
| Db min - Min stop ring position diameter | 0 mm |
Produits associés
SNR 6002NC3