SNR
Unités de roulement MUC206FD
Palier SNR MUC206FD, Ø30×62×38.1 mm. Demandez un devis — expédition dans le monde entier.
Type Unités de roulement
Dimensions
Ø 30 × 62 × 38,1 mm
d30Ø alésage (mm)
×
D62Ø extérieur (mm)
×
B38,1Largeur (mm)
Demande de devis
En stock
Spécifications techniques
| Brand | SNR |
| B - Width of Inner Ring | 38,1 mm |
| C - Width of Outer Ring | 19 mm |
| C1 - Distance center of OR to center of lubrication zone | 5,1 mm |
| d - Shaft diameter | 30 mm |
| D - Outer diameter of OR | 62 mm |
| G - Set screw size | M6x1 |
| m - Distance to set screw | 5 mm |
| r - Radius Inner Ring | 1.5 |
| S - Distance front side/bearing centre | 15,9 mm |
| f0 - Factor | 13.7 |
| SW - Wrench size | 3 mm |
| C - Dynamic load rating | 16700000 mN |
| C0 - Static load rating | 9000000 mN |
| Operating temperature min. | 253,15 °K |
| Operating temperature max. | 373,15 °K |
| Mass | 0,31 kg |
| Recommended tightening torque for set screw | 3,9 N-m |
| BPFO - Over rolling frequency on outer ring (60 rpm) | 3,578 Hz |
| BPFI - Over rolling frequency on inner (60 rpm) | 5,422 Hz |
| BSF - Over rolling frequency on rolling element (60 rpm) | 4,677 Hz |
| BRF - Rotational frequency – rolling element (60 rpm) | 2,339 Hz |
| FTF - Rotational frequency - cage (60 rpm) | 0,398 Hz |
Produits associés
SNR MUC206FD