SNR
Unités de roulement SES207
Palier SNR SES207, Ø35×72×25.4 mm. Demandez un devis — expédition dans le monde entier.
Type Unités de roulement
Dimensions
Ø 35 × 72 × 25,4 mm
d35Ø alésage (mm)
×
D72Ø extérieur (mm)
×
B25,4Largeur (mm)
Demande de devis
En stock
Spécifications techniques
| Brand | SNR |
| B - Width of Inner Ring | 25,4 mm |
| B1 - Overall width Inner Ring | 38,9 mm |
| B2 - Width of eccentric locking collar/nut | 17,5 mm |
| C - Width of Outer Ring | 17 mm |
| C1 - Distance center of OR to center of lubrication zone | 5,7 mm |
| d - Shaft diameter | 35 mm |
| d1 - Outer dia of eccent. Lock. collar / nut of adapter sleeve | 55,6 mm |
| D - Outer diameter of OR | 72 mm |
| G - Set screw size | M8x1 |
| m - Distance to set screw | 6,5 mm |
| r - Radius Inner Ring | 1 |
| S - Distance front side/bearing centre | 8,5 mm |
| f0 - Factor | 13.7 |
| SW - Wrench size | 4 mm |
| C - Dynamic load rating | 25600000 mN |
| C0 - Static load rating | 15300000 mN |
| Operating temperature min. | 253,15 °K |
| Operating temperature max. | 373,15 °K |
| Mass | 0,51 kg |
| Recommended tightening torque for set screw | 8,3 N-m |
| BPFO - Over rolling frequency on outer ring (60 rpm) | 3,565 Hz |
| BPFI - Over rolling frequency on inner (60 rpm) | 5,435 Hz |
| BSF - Over rolling frequency on rolling element (60 rpm) | 4,607 Hz |
| BRF - Rotational frequency – rolling element (60 rpm) | 2,304 Hz |
| FTF - Rotational frequency - cage (60 rpm) | 0,396 Hz |
Produits associés
SNR SES207