SNR
Unités de roulement SES210
Palier SNR SES210, Ø50×90×30.2 mm. Demandez un devis — expédition dans le monde entier.
Type Unités de roulement
Dimensions
Ø 50 × 90 × 30,2 mm
d50Ø alésage (mm)
×
D90Ø extérieur (mm)
×
B30,2Largeur (mm)
Demande de devis
En stock
Spécifications techniques
| Brand | SNR |
| B - Width of Inner Ring | 30,2 mm |
| B1 - Overall width Inner Ring | 43,7 mm |
| B2 - Width of eccentric locking collar/nut | 18,3 mm |
| C - Width of Outer Ring | 20 mm |
| C1 - Distance center of OR to center of lubrication zone | 6,5 mm |
| d - Shaft diameter | 50 mm |
| d1 - Outer dia of eccent. Lock. collar / nut of adapter sleeve | 69,9 mm |
| D - Outer diameter of OR | 90 mm |
| G - Set screw size | M8x1 |
| m - Distance to set screw | 6,5 mm |
| r - Radius Inner Ring | 1 |
| S - Distance front side/bearing centre | 10 mm |
| f0 - Factor | 14.4 |
| SW - Wrench size | 4 mm |
| C - Dynamic load rating | 35000000 mN |
| C0 - Static load rating | 23100000 mN |
| Operating temperature min. | 253,15 °K |
| Operating temperature max. | 373,15 °K |
| Mass | 0,75 kg |
| Recommended tightening torque for set screw | 8,3 N-m |
| BPFO - Over rolling frequency on outer ring (60 rpm) | 4,093 Hz |
| BPFI - Over rolling frequency on inner (60 rpm) | 5,907 Hz |
| BSF - Over rolling frequency on rolling element (60 rpm) | 5,33 Hz |
| BRF - Rotational frequency – rolling element (60 rpm) | 2,665 Hz |
| FTF - Rotational frequency - cage (60 rpm) | 0,409 Hz |
Produits associés
SNR SES210