SNR
Unités de roulement SUC210-32
Palier SNR SUC210-32, Ø50.8×90×51.6 mm. Demandez un devis — expédition dans le monde entier.
Type Unités de roulement
Dimensions
Ø 50,8 × 90 × 51,6 mm
d50,8Ø alésage (mm)
×
D90Ø extérieur (mm)
×
B51,6Largeur (mm)
Demande de devis
En stock
Spécifications techniques
| Brand | SNR |
| B - Width of Inner Ring | 51,6 mm |
| C - Width of Outer Ring | 24 mm |
| C1 - Distance center of OR to center of lubrication zone | 6,5 mm |
| d - Shaft diameter | 50,8 mm |
| D - Outer diameter of OR | 90 mm |
| G - Set screw size | 3/8-24UNF |
| m - Distance to set screw | 10 mm |
| r - Radius Inner Ring | 1 |
| S - Distance front side/bearing centre | 19 mm |
| f0 - Factor | 14.4 |
| SW - Wrench size | 4,763 mm |
| C - Dynamic load rating | 35000000 mN |
| C0 - Static load rating | 23100000 mN |
| Operating temperature min. | 253,15 °K |
| Operating temperature max. | 373,15 °K |
| Mass | 0,73 kg |
| Recommended tightening torque for set screw | 18,7 N-m |
| BPFO - Over rolling frequency on outer ring (60 rpm) | 4,093 Hz |
| BPFI - Over rolling frequency on inner (60 rpm) | 5,907 Hz |
| BSF - Over rolling frequency on rolling element (60 rpm) | 5,33 Hz |
| BRF - Rotational frequency – rolling element (60 rpm) | 2,665 Hz |
| FTF - Rotational frequency - cage (60 rpm) | 0,409 Hz |
Produits associés
SNR SUC210-32