SNR
Unités de roulement UC201-08G2
Palier SNR UC201-08G2, Ø12.7×47×31 mm. Demandez un devis — expédition dans le monde entier.
Type Unités de roulement
Dimensions
Ø 12,7 × 47 × 31 mm
d12,7Ø alésage (mm)
×
D47Ø extérieur (mm)
×
B31Largeur (mm)
Demande de devis
En stock
Spécifications techniques
| Brand | SNR |
| B - Width of Inner Ring | 31 mm |
| C - Width of Outer Ring | 16 mm |
| C1 - Distance center of OR to center of lubrication zone | 4,4 mm |
| d - Shaft diameter | 12,7 mm |
| D - Outer diameter of OR | 47 mm |
| G - Set screw size | 1/4-28UNF |
| m - Distance to set screw | 4,7 mm |
| r - Radius Inner Ring | 0.6 |
| S - Distance front side/bearing centre | 12,7 mm |
| f0 - Factor | 13.2 |
| SW - Wrench size | 3,175 mm |
| C - Dynamic load rating | 12800000 mN |
| C0 - Static load rating | 6650000 mN |
| Operating temperature min. | 253,15 °K |
| Operating temperature max. | 373,15 °K |
| Mass | 0,21 kg |
| Recommended tightening torque for set screw | 3,7 N-m |
| BPFO - Over rolling frequency on outer ring (60 rpm) | 3,063 Hz |
| BPFI - Over rolling frequency on inner (60 rpm) | 4,937 Hz |
| BSF - Over rolling frequency on rolling element (60 rpm) | 4,037 Hz |
| BRF - Rotational frequency – rolling element (60 rpm) | 2,018 Hz |
| FTF - Rotational frequency - cage (60 rpm) | 0,383 Hz |
Produits associés
SNR UC201-08G2