SNR
Unités de roulement UC205G2
Palier SNR UC205G2, Ø25×52×34 mm. Demandez un devis — expédition dans le monde entier.
Type Unités de roulement
Dimensions
Ø 25 × 52 × 34 mm
d25Ø alésage (mm)
×
D52Ø extérieur (mm)
×
B34Largeur (mm)
Demande de devis
En stock
Spécifications techniques
| Brand | SNR |
| B - Width of Inner Ring | 34 mm |
| C - Width of Outer Ring | 17 mm |
| C1 - Distance center of OR to center of lubrication zone | 4,3 mm |
| d - Shaft diameter | 25 mm |
| D - Outer diameter of OR | 52 mm |
| G - Set screw size | M6x1 |
| m - Distance to set screw | 5,5 mm |
| r - Radius Inner Ring | 0.6 |
| S - Distance front side/bearing centre | 14,3 mm |
| f0 - Factor | 14 |
| SW - Wrench size | 3 mm |
| C - Dynamic load rating | 14000000 mN |
| C0 - Static load rating | 7880000 mN |
| Operating temperature min. | 253,15 °K |
| Operating temperature max. | 373,15 °K |
| Mass | 0,21 kg |
| Recommended tightening torque for set screw | 5,5 N-m |
| BPFO - Over rolling frequency on outer ring (60 rpm) | 3,582 Hz |
| BPFI - Over rolling frequency on inner (60 rpm) | 5,418 Hz |
| BSF - Over rolling frequency on rolling element (60 rpm) | 4,697 Hz |
| BRF - Rotational frequency – rolling element (60 rpm) | 2,348 Hz |
| FTF - Rotational frequency - cage (60 rpm) | 0,398 Hz |
Produits associés
SNR UC205G2