SNR
Unités de roulement UC213G2
Palier SNR UC213G2, Ø65×120×65.1 mm. Demandez un devis — expédition dans le monde entier.
Type Unités de roulement
Dimensions
Ø 65 × 120 × 65,1 mm
d65Ø alésage (mm)
×
D120Ø extérieur (mm)
×
B65,1Largeur (mm)
Demande de devis
En stock
Spécifications techniques
| Brand | SNR |
| B - Width of Inner Ring | 65,1 mm |
| C - Width of Outer Ring | 28 mm |
| C1 - Distance center of OR to center of lubrication zone | 8 mm |
| d - Shaft diameter | 65 mm |
| D - Outer diameter of OR | 120 mm |
| G - Set screw size | M12x1,25 |
| m - Distance to set screw | 12 mm |
| r - Radius Inner Ring | 1.5 |
| S - Distance front side/bearing centre | 25,4 mm |
| f0 - Factor | 14.4 |
| SW - Wrench size | 6 mm |
| C - Dynamic load rating | 57200000 mN |
| C0 - Static load rating | 40000000 mN |
| Operating temperature min. | 253,15 °K |
| Operating temperature max. | 373,15 °K |
| Mass | 1,86 kg |
| Recommended tightening torque for set screw | 33 N-m |
| BPFO - Over rolling frequency on outer ring (60 rpm) | 4,099 Hz |
| BPFI - Over rolling frequency on inner (60 rpm) | 5,901 Hz |
| BSF - Over rolling frequency on rolling element (60 rpm) | 5,369 Hz |
| BRF - Rotational frequency – rolling element (60 rpm) | 2,685 Hz |
| FTF - Rotational frequency - cage (60 rpm) | 0,41 Hz |
Produits associés
SNR UC213G2