SNR
Unités de roulement UC214G2T20
Palier SNR UC214G2T20, Ø70×125×74.6 mm. Demandez un devis — expédition dans le monde entier.
Type Unités de roulement
Dimensions
Ø 70 × 125 × 74,6 mm
d70Ø alésage (mm)
×
D125Ø extérieur (mm)
×
B74,6Largeur (mm)
Demande de devis
En stock
Spécifications techniques
| Brand | SNR |
| B - Width of Inner Ring | 74,6 mm |
| C - Width of Outer Ring | 30 mm |
| C1 - Distance center of OR to center of lubrication zone | 9 mm |
| d - Shaft diameter | 70 mm |
| D - Outer diameter of OR | 125 mm |
| G - Set screw size | M12x1,25 |
| m - Distance to set screw | 12 mm |
| r - Radius Inner Ring | 2 |
| S - Distance front side/bearing centre | 30,2 mm |
| f0 - Factor | 14.4 |
| SW - Wrench size | 6 mm |
| C - Dynamic load rating | 62000000 mN |
| C0 - Static load rating | 45000000 mN |
| Operating temperature min. | 253,15 °K |
| Operating temperature max. | 473,15 °K |
| Mass | 2,05 kg |
| Recommended tightening torque for set screw | 33 N-m |
| BPFO - Over rolling frequency on outer ring (60 rpm) | 4,104 Hz |
| BPFI - Over rolling frequency on inner (60 rpm) | 5,896 Hz |
| BSF - Over rolling frequency on rolling element (60 rpm) | 5,404 Hz |
| BRF - Rotational frequency – rolling element (60 rpm) | 2,702 Hz |
| FTF - Rotational frequency - cage (60 rpm) | 0,41 Hz |
Produits associés
SNR UC214G2T20