SNR
Unités de roulement UC216G2
Palier SNR UC216G2, Ø80×140×82.6 mm. Demandez un devis — expédition dans le monde entier.
Type Unités de roulement
Dimensions
Ø 80 × 140 × 82,6 mm
d80Ø alésage (mm)
×
D140Ø extérieur (mm)
×
B82,6Largeur (mm)
Demande de devis
En stock
Spécifications techniques
| Brand | SNR |
| B - Width of Inner Ring | 82,6 mm |
| C - Width of Outer Ring | 33 mm |
| C1 - Distance center of OR to center of lubrication zone | 10,3 mm |
| d - Shaft diameter | 80 mm |
| D - Outer diameter of OR | 140 mm |
| G - Set screw size | M12x1,25 |
| m - Distance to set screw | 14 mm |
| r - Radius Inner Ring | 2 |
| S - Distance front side/bearing centre | 33,3 mm |
| f0 - Factor | 14.7 |
| SW - Wrench size | 6 mm |
| C - Dynamic load rating | 72500000 mN |
| C0 - Static load rating | 54200000 mN |
| Operating temperature min. | 253,15 °K |
| Operating temperature max. | 373,15 °K |
| Mass | 2,79 kg |
| Recommended tightening torque for set screw | 33 N-m |
| BPFO - Over rolling frequency on outer ring (60 rpm) | 4,134 Hz |
| BPFI - Over rolling frequency on inner (60 rpm) | 5,866 Hz |
| BSF - Over rolling frequency on rolling element (60 rpm) | 5,601 Hz |
| BRF - Rotational frequency – rolling element (60 rpm) | 2,801 Hz |
| FTF - Rotational frequency - cage (60 rpm) | 0,413 Hz |
Produits associés
SNR UC216G2