SNR
Unités de roulement UC310G2
Palier SNR UC310G2, Ø50×110×61 mm. Demandez un devis — expédition dans le monde entier.
Type Unités de roulement
Dimensions
Ø 50 × 110 × 61 mm
d50Ø alésage (mm)
×
D110Ø extérieur (mm)
×
B61Largeur (mm)
Demande de devis
En stock
Spécifications techniques
| Brand | SNR |
| B - Width of Inner Ring | 61 mm |
| C - Width of Outer Ring | 32 mm |
| C1 - Distance center of OR to center of lubrication zone | 9,9 mm |
| d - Shaft diameter | 50 mm |
| D - Outer diameter of OR | 110 mm |
| G - Set screw size | M10x1,5 |
| m - Distance to set screw | 12 mm |
| r - Radius Inner Ring | 2 |
| S - Distance front side/bearing centre | 22 mm |
| f0 - Factor | 13 |
| SW - Wrench size | 5 mm |
| C - Dynamic load rating | 61750000 mN |
| C0 - Static load rating | 37800000 mN |
| Operating temperature min. | 253,15 °K |
| Operating temperature max. | 373,15 °K |
| Mass | 1,7 kg |
| Recommended tightening torque for set screw | 22 N-m |
| BPFO - Over rolling frequency on outer ring (60 rpm) | 3,053 Hz |
| BPFI - Over rolling frequency on inner (60 rpm) | 4,947 Hz |
| BSF - Over rolling frequency on rolling element (60 rpm) | 3,989 Hz |
| BRF - Rotational frequency – rolling element (60 rpm) | 1,994 Hz |
| FTF - Rotational frequency - cage (60 rpm) | 0,382 Hz |
Produits associés
SNR UC310G2