SNR
Unités de roulement UC313G2L3
Palier SNR UC313G2L3, Ø65×140×75 mm. Demandez un devis — expédition dans le monde entier.
Type Unités de roulement
Dimensions
Ø 65 × 140 × 75 mm
d65Ø alésage (mm)
×
D140Ø extérieur (mm)
×
B75Largeur (mm)
Demande de devis
En stock
Spécifications techniques
| Brand | SNR |
| B - Width of Inner Ring | 75 mm |
| C - Width of Outer Ring | 38 mm |
| C1 - Distance center of OR to center of lubrication zone | 12,1 mm |
| d - Shaft diameter | 65 mm |
| D - Outer diameter of OR | 140 mm |
| G - Set screw size | M12x1,25 |
| m - Distance to set screw | 12 mm |
| r - Radius Inner Ring | 2 |
| S - Distance front side/bearing centre | 30 mm |
| f0 - Factor | 13.2 |
| SW - Wrench size | 6 mm |
| C - Dynamic load rating | 93860000 mN |
| C0 - Static load rating | 60500000 mN |
| Operating temperature min. | 253,15 °K |
| Operating temperature max. | 373,15 °K |
| Mass | 3,25 kg |
| Recommended tightening torque for set screw | 33 N-m |
| BPFO - Over rolling frequency on outer ring (60 rpm) | 3,071 Hz |
| BPFI - Over rolling frequency on inner (60 rpm) | 4,929 Hz |
| BSF - Over rolling frequency on rolling element (60 rpm) | 4,072 Hz |
| BRF - Rotational frequency – rolling element (60 rpm) | 2,036 Hz |
| FTF - Rotational frequency - cage (60 rpm) | 0,384 Hz |
Produits associés
SNR UC313G2L3