SNR
Unités de roulement UC315G2T04
Palier SNR UC315G2T04, Ø75×160×82 mm. Demandez un devis — expédition dans le monde entier.
Type Unités de roulement
Dimensions
Ø 75 × 160 × 82 mm
d75Ø alésage (mm)
×
D160Ø extérieur (mm)
×
B82Largeur (mm)
Demande de devis
En stock
Spécifications techniques
| Brand | SNR |
| B - Width of Inner Ring | 82 mm |
| C - Width of Outer Ring | 42 mm |
| C1 - Distance center of OR to center of lubrication zone | 13,5 mm |
| d - Shaft diameter | 75 mm |
| D - Outer diameter of OR | 160 mm |
| G - Set screw size | M14x1,5 |
| m - Distance to set screw | 14 mm |
| r - Radius Inner Ring | 2.5 |
| S - Distance front side/bearing centre | 32 mm |
| f0 - Factor | 13.2 |
| SW - Wrench size | 6 mm |
| C - Dynamic load rating | 113360000 mN |
| C0 - Static load rating | 76800000 mN |
| Operating temperature min. | 233,15 °K |
| Operating temperature max. | 373,15 °K |
| Mass | 4,33 kg |
| Recommended tightening torque for set screw | 42 N-m |
| BPFO - Over rolling frequency on outer ring (60 rpm) | 3,081 Hz |
| BPFI - Over rolling frequency on inner (60 rpm) | 4,919 Hz |
| BSF - Over rolling frequency on rolling element (60 rpm) | 4,124 Hz |
| BRF - Rotational frequency – rolling element (60 rpm) | 2,062 Hz |
| FTF - Rotational frequency - cage (60 rpm) | 0,385 Hz |
Produits associés
SNR UC315G2T04