SNR
Unités de roulement UC319G2L3
Palier SNR UC319G2L3, Ø95×200×103 mm. Demandez un devis — expédition dans le monde entier.
Type Unités de roulement
Dimensions
Ø 95 × 200 × 103 mm
d95Ø alésage (mm)
×
D200Ø extérieur (mm)
×
B103Largeur (mm)
Demande de devis
En stock
Spécifications techniques
| Brand | SNR |
| B - Width of Inner Ring | 103 mm |
| C - Width of Outer Ring | 50 mm |
| C1 - Distance center of OR to center of lubrication zone | 16,7 mm |
| d - Shaft diameter | 95 mm |
| D - Outer diameter of OR | 200 mm |
| G - Set screw size | M16x1,5 |
| m - Distance to set screw | 18 mm |
| r - Radius Inner Ring | 3 |
| S - Distance front side/bearing centre | 41 mm |
| f0 - Factor | 13.2 |
| SW - Wrench size | 8 mm |
| C - Dynamic load rating | 156000000 mN |
| C0 - Static load rating | 122000000 mN |
| Operating temperature min. | 253,15 °K |
| Operating temperature max. | 373,15 °K |
| Mass | 8,91 kg |
| Recommended tightening torque for set screw | 64 N-m |
| BPFO - Over rolling frequency on outer ring (60 rpm) | 3,096 Hz |
| BPFI - Over rolling frequency on inner (60 rpm) | 4,904 Hz |
| BSF - Over rolling frequency on rolling element (60 rpm) | 4,198 Hz |
| BRF - Rotational frequency – rolling element (60 rpm) | 2,099 Hz |
| FTF - Rotational frequency - cage (60 rpm) | 0,387 Hz |
Produits associés
SNR UC319G2L3