SNR
Unités de roulement UC326G2L3
Palier SNR UC326G2L3, Ø130×280×135 mm. Demandez un devis — expédition dans le monde entier.
Type Unités de roulement
Dimensions
Ø 130 × 280 × 135 mm
d130Ø alésage (mm)
×
D280Ø extérieur (mm)
×
B135Largeur (mm)
Demande de devis
En stock
Spécifications techniques
| Brand | SNR |
| B - Width of Inner Ring | 135 mm |
| C - Width of Outer Ring | 68 mm |
| C1 - Distance center of OR to center of lubrication zone | 23 mm |
| d - Shaft diameter | 130 mm |
| D - Outer diameter of OR | 280 mm |
| G - Set screw size | M20x1,5 |
| m - Distance to set screw | 20 mm |
| r - Radius Inner Ring | 4 |
| S - Distance front side/bearing centre | 54 mm |
| f0 - Factor | 13.5 |
| SW - Wrench size | 10 mm |
| C - Dynamic load rating | 252000000 mN |
| C0 - Static load rating | 242000000 mN |
| Operating temperature min. | 253,15 °K |
| Operating temperature max. | 373,15 °K |
| Mass | 23 kg |
| Recommended tightening torque for set screw | 120 N-m |
| BPFO - Over rolling frequency on outer ring (60 rpm) | 3,133 Hz |
| BPFI - Over rolling frequency on inner (60 rpm) | 4,867 Hz |
| BSF - Over rolling frequency on rolling element (60 rpm) | 4,395 Hz |
| BRF - Rotational frequency – rolling element (60 rpm) | 2,198 Hz |
| FTF - Rotational frequency - cage (60 rpm) | 0,392 Hz |
Produits associés
SNR UC326G2L3