SNR
Unités de roulement US201G2T04
Palier SNR US201G2T04, Ø12×40×22 mm. Demandez un devis — expédition dans le monde entier.
Type Unités de roulement
Dimensions
Ø 12 × 40 × 22 mm
d12Ø alésage (mm)
×
D40Ø extérieur (mm)
×
B22Largeur (mm)
Demande de devis
En stock
Spécifications techniques
| Brand | SNR |
| B - Width of Inner Ring | 22 mm |
| C - Width of Outer Ring | 12 mm |
| C1 - Distance center of OR to center of lubrication zone | 3,6 mm |
| d - Shaft diameter | 12 mm |
| D - Outer diameter of OR | 40 mm |
| G - Set screw size | M5x0,8 |
| m - Distance to set screw | 4 mm |
| r - Radius Inner Ring | 0.6 |
| S - Distance front side/bearing centre | 6 mm |
| f0 - Factor | 13.2 |
| SW - Wrench size | 2,5 mm |
| C - Dynamic load rating | 9550000 mN |
| C0 - Static load rating | 4780000 mN |
| Operating temperature min. | 233,15 °K |
| Operating temperature max. | 373,15 °K |
| Mass | 0,09 kg |
| Recommended tightening torque for set screw | 3,5 N-m |
| BPFO - Over rolling frequency on outer ring (60 rpm) | 3,069 Hz |
| BPFI - Over rolling frequency on inner (60 rpm) | 4,931 Hz |
| BSF - Over rolling frequency on rolling element (60 rpm) | 4,066 Hz |
| BRF - Rotational frequency – rolling element (60 rpm) | 2,033 Hz |
| FTF - Rotational frequency - cage (60 rpm) | 0,384 Hz |
Produits associés
SNR US201G2T04