SNR
Bearing units UC218G2
Housing unit SNR UC218G2, Ø90×160×96 mm. Request a quote — worldwide shipping.
Type Bearing units
Dimensions
Ø 90 × 160 × 96 mm
d90Bore Ø (mm)
×
D160Outer Ø (mm)
×
B96Width (mm)
Request quote
In stock
Technical specifications
| Brand | SNR |
| B - Width of Inner Ring | 96 mm |
| C - Width of Outer Ring | 37 mm |
| C1 - Distance center of OR to center of lubrication zone | 12 mm |
| d - Shaft diameter | 90 mm |
| D - Outer diameter of OR | 160 mm |
| G - Set screw size | M12x1,25 |
| m - Distance to set screw | 14 mm |
| r - Radius Inner Ring | 2 |
| S - Distance front side/bearing centre | 39,7 mm |
| f0 - Factor | 14.4 |
| SW - Wrench size | 6 mm |
| C - Dynamic load rating | 96000000 mN |
| C0 - Static load rating | 71500000 mN |
| Operating temperature min. | 253,15 °K |
| Operating temperature max. | 373,15 °K |
| Mass | 4,45 kg |
| Recommended tightening torque for set screw | 33 N-m |
| BPFO - Over rolling frequency on outer ring (60 rpm) | 4,111 Hz |
| BPFI - Over rolling frequency on inner (60 rpm) | 5,889 Hz |
| BSF - Over rolling frequency on rolling element (60 rpm) | 5,446 Hz |
| BRF - Rotational frequency – rolling element (60 rpm) | 2,723 Hz |
| FTF - Rotational frequency - cage (60 rpm) | 0,411 Hz |
Related products
SNR UC218G2