SNR
Bearing units UC307G2
Housing unit SNR UC307G2, Ø35×80×48 mm. Request a quote — worldwide shipping.
Type Bearing units
Dimensions
Ø 35 × 80 × 48 mm
d35Bore Ø (mm)
×
D80Outer Ø (mm)
×
B48Width (mm)
Request quote
In stock
Technical specifications
| Brand | SNR |
| B - Width of Inner Ring | 48 mm |
| C - Width of Outer Ring | 25 mm |
| C1 - Distance center of OR to center of lubrication zone | 7,2 mm |
| d - Shaft diameter | 35 mm |
| D - Outer diameter of OR | 80 mm |
| G - Set screw size | M8x1 |
| m - Distance to set screw | 8 mm |
| r - Radius Inner Ring | 2 |
| S - Distance front side/bearing centre | 19 mm |
| f0 - Factor | 12.8 |
| SW - Wrench size | 4 mm |
| C - Dynamic load rating | 33500000 mN |
| C0 - Static load rating | 19200000 mN |
| Operating temperature min. | 253,15 °K |
| Operating temperature max. | 373,15 °K |
| Mass | 0,71 kg |
| Recommended tightening torque for set screw | 11,5 N-m |
| BPFO - Over rolling frequency on outer ring (60 rpm) | 2,63 Hz |
| BPFI - Over rolling frequency on inner (60 rpm) | 4,37 Hz |
| BSF - Over rolling frequency on rolling element (60 rpm) | 3,776 Hz |
| BRF - Rotational frequency – rolling element (60 rpm) | 1,888 Hz |
| FTF - Rotational frequency - cage (60 rpm) | 0,376 Hz |
Related products
SNR UC307G2