SNR
Bearing units UCX10G2
Housing unit SNR UCX10G2, Ø50×100×55.6 mm. Request a quote — worldwide shipping.
Type Bearing units
Dimensions
Ø 50 × 100 × 55,6 mm
d50Bore Ø (mm)
×
D100Outer Ø (mm)
×
B55,6Width (mm)
Request quote
In stock
Technical specifications
| Brand | SNR |
| B - Width of Inner Ring | 55,6 mm |
| C - Width of Outer Ring | 25 mm |
| C1 - Distance center of OR to center of lubrication zone | 7,2 mm |
| d - Shaft diameter | 50 mm |
| D - Outer diameter of OR | 100 mm |
| G - Set screw size | M10x1,25 |
| m - Distance to set screw | 9 mm |
| r - Radius Inner Ring | 1.2 |
| S - Distance front side/bearing centre | 22,2 mm |
| f0 - Factor | 14.4 |
| SW - Wrench size | 5 mm |
| C - Dynamic load rating | 43550000 mN |
| C0 - Static load rating | 29200000 mN |
| Operating temperature min. | 253,15 °K |
| Operating temperature max. | 373,15 °K |
| Mass | 1,26 kg |
| Recommended tightening torque for set screw | 22 N-m |
| BPFO - Over rolling frequency on outer ring (60 rpm) | 4,078 Hz |
| BPFI - Over rolling frequency on inner (60 rpm) | 5,922 Hz |
| BSF - Over rolling frequency on rolling element (60 rpm) | 5,24 Hz |
| BRF - Rotational frequency – rolling element (60 rpm) | 2,62 Hz |
| FTF - Rotational frequency - cage (60 rpm) | 0,408 Hz |
Related products
SNR UCX10G2