SNR
Bearing units UCX16G2
Housing unit SNR UCX16G2, Ø80×150×85.7 mm. Request a quote — worldwide shipping.
Type Bearing units
Dimensions
Ø 80 × 150 × 85,7 mm
d80Bore Ø (mm)
×
D150Outer Ø (mm)
×
B85,7Width (mm)
Request quote
In stock
Technical specifications
| Brand | SNR |
| B - Width of Inner Ring | 85,7 mm |
| C - Width of Outer Ring | 35 mm |
| C1 - Distance center of OR to center of lubrication zone | 11 mm |
| d - Shaft diameter | 80 mm |
| D - Outer diameter of OR | 150 mm |
| G - Set screw size | M12x1,25 |
| m - Distance to set screw | 14 mm |
| r - Radius Inner Ring | 2.5 |
| S - Distance front side/bearing centre | 34,1 mm |
| f0 - Factor | 14.7 |
| SW - Wrench size | 6 mm |
| C - Dynamic load rating | 83200000 mN |
| C0 - Static load rating | 63800000 mN |
| Operating temperature min. | 253,15 °K |
| Operating temperature max. | 373,15 °K |
| Mass | 3,95 kg |
| Recommended tightening torque for set screw | 33 N-m |
| BPFO - Over rolling frequency on outer ring (60 rpm) | 4,571 Hz |
| BPFI - Over rolling frequency on inner (60 rpm) | 6,429 Hz |
| BSF - Over rolling frequency on rolling element (60 rpm) | 5,752 Hz |
| BRF - Rotational frequency – rolling element (60 rpm) | 2,876 Hz |
| FTF - Rotational frequency - cage (60 rpm) | 0,416 Hz |
Related products
SNR UCX16G2